Visit us on Google
Whatsapp Chat
Connect via Linktree
Connect via Linktree

Motor Control Centers (MCC) &
Intelligent IMCC Panels

Centralized motor drive management designed for continuous-duty industrial plants, pump rooms, heavy air systems, and automated production corridors. Built with verified Type-2 short-circuit coordination, microprocessor-based motor protection relays (MPR), and dedicated isolated vertical cable chambers.

Type-2
No Contactor Welding
Drawout
Modular Drawers
Form 4b
Segregation Standard
SCADA
Modbus / Profibus
MCC and Intelligent Motor Control Centers Panel
Coordinated Switchgear MakesSchneider • L&T • Siemens • Others
100% FAT Tested
Motor Control Fundamentals

Understanding Motor Control Centers (MCC) & Intelligent IMCC Switchboards

In heavy manufacturing, process industries, and large commercial facilities, motors consume over 70% of total plant power. Coordinating starting torque, short-circuit protection, and process telemetry requires centralized, segregated motor management switchgear.

What is a Motor Control Center (MCC)?

A Motor Control Center (MCC) is a modular, compartmentalized metal enclosure that houses multiple motor starter units in a vertical lineup, served by a common horizontal busbar. Each motor feeder operates inside its own isolated compartment equipped with an isolator or circuit breaker, motor contactor, overload relay, and control transformer.

Conventional MCCs use hardwired pushbuttons, indicator lamps, and control relays, directing power safely to multi-motor infrastructure including compressors, conveyors, heavy exhaust fans, and water pumps.

Architecture: Fixed compartmentalized or modular drawout drawers
Protection: Type-2 coordinated thermal-magnetic or electronic OLRs

What is an Intelligent Motor Control Center (IMCC)?

An Intelligent Motor Control Center (IMCC) upgrades conventional motor control by integrating microprocessor-based Motor Management Relays (MMRs) and digital industrial fieldbus communication (Modbus, Profibus, Ethernet/IP, or Profinet).

Instead of hundreds of bundles of hardwired analog and digital control cables, all diagnostic data—including real-time phase current, voltage, thermal motor capacity, ground fault alerts, and running hours—is streamed straight to the central SCADA or BMS workstation, enabling automated predictive maintenance.

Telemetry: Live kW, power factor, thermal capacity %, and run hours
Diagnostics: Rotor jam, stall, phase loss, and ground-fault root causes

Technical Comparison: Conventional MCC vs. Intelligent IMCC

Key functional differences to evaluate for plant design and automation tenders.

Engineering AspectIntelligent IMCC SwitchboardConventional Standard MCC
Control Wiring TopologySingle fieldbus trunk cable (RS-485 / Ethernet / Profinet)Dense point-to-point hardwired copper multi-core cabling
Protection & RelayingDigital MMR with programmable I²t thermal curves & stall tripBi-metallic thermal overload relays or standard electronic relays
Real-Time Process DataFull telemetry: Current, Voltage, THD, Run Hours, Power FactorLimited to door-mounted analog/digital meters per feeder
Fault Diagnostics & HistoryTimestamped event log with pre-fault current snapshotSimple door trip lamp indication without cause history
Commissioning & ModificationsSoftware logic reconfiguration without re-pulling wiresPhysical rewiring of terminal blocks and control circuits required
Verified Type-2 Coordination Standard: In accordance with IEC 60947-4-1, Adhunik Powertech designs starter feeder assemblies engineered to endure high prospective short circuits without contactor welding or damage to overload devices. In the event of a fault, the feeder returns to operation immediately without needing component replacements.
Submit Motor Load List
Advanced Motor Protection & Control

Engineered for Zero Downtime & Precise Process Telemetry

From heavy mechanical pump houses to multi-fan ventilation arrays, our MCC panels ensure maximum electrical life.

Verified Type-2 Coordination

Engineered with motor circuit breakers (MPCB), heavy-duty contactors, and thermal-electronic overloads tested to withstand peak short-circuit events without contact melting or permanent weld damage.

Smart Digital IMCC Networking

Eliminates miles of control wiring by routing operating current, thermal overload curves, running hours, and start/stop commands over RS485 Modbus RTU, Profibus, or BACnet IP directly to the central control room.

Modular Drawout Drawers

Drawout cassette units feature reliable mechanical interlocks, distinct Test/Service/Disconnected positions, and self-aligning power stabs for safe maintenance during live operation.

Certified Design Standard

MCC / IMCC Switchboard Engineering Data Sheet

Manufactured and inspected strictly in compliance with IS 8623, IEC 61439-1 & 2, and IEC 60947-4-1 standards.

Engineering ParameterAdhunik Powertech Specification
Rated Operational Voltage (Ue)415V AC ± 10%, 3-Phase, 3-Wire / 4-Wire, 50 Hz
Rated Insulation & Impulse Voltage1000V AC Insulation / 8kV Peak Impulse Withstand
Main Horizontal Busbar RatingUp to 3200A Continuous Rating (Electrolytic Cu / E91E Al)
Vertical Dropper BusbarsIsolated, Fully Shrouded Vertical Busbar Alley (Up to 1000A)
Short-Circuit Fault Capacity50kA / 65kA rms for 1.0 Second (CPRI Type-Tested)
Short-Circuit CoordinationType-2 Coordination Verified (Zero Contactor Welding)
Internal Separation ClassForm 3b / Form 4b (IS 8623 / IEC 61439-1 & 2 Compliant)
Module Execution TypesFully Compartmentalized Fixed Type & Fully Drawout Cassette Type
Starter Feeder ConfigurationsDirect-On-Line (DOL), Automatic Star-Delta, Soft-Starters & VFDs
Motor Protection UnitsMicroprocessor MPR (Thermal Model, Jam, Stall, Earth Fault, Phase Loss)
Intelligent IMCC Protocol OptionsModbus RTU (RS485), Profibus-DP, Ethernet/IP, Profinet & BACnet
Enclosure Construction & Finish1.6mm / 2.0mm CRCA Sheet Metal, 7-Tank Treated, 60–80μm RAL 7032/7035
Ingress Protection (IP Class)IP42 (Indoor Natural) / IP54 / IP55 (Continuous CNC PU Foam Gasketing)
Flexible Feeder Architectures

Starter Types Tailored to Motor Inrush & Duty Cycles

Every motor feeder is sized for thermal stability, optimal torque, and reduced utility power dips.

Feeder Class 01

DOL Starters (Up to 7.5 HP)

Equipped with MPCB and heavy-duty contactors for high starting torque loads such as small utility pumps, auxiliary fans, and compressors.

Feeder Class 02

Star-Delta (10 HP to 50 HP)

Transition timer controlled with mechanical and electrical interlocking contactors to cut inrush starting current to one-third of normal values.

Feeder Class 03

Soft Starters (60 HP to 250 HP)

Thyristor-controlled voltage ramp starter with integrated bypass contactor, eliminating hydraulic water hammer in long pump pipelines.

Feeder Class 04

VFD Drive Feeders (Any Rating)

Integrated variable frequency drives for continuous closed-loop speed modulation, line chokes, and specialized enclosure panel air conditioning.

Northern India Engineering Network

Supplying MCC & IMCC Panels Across Major Industrial Hubs

Delhi NCRGurugramFaridabadNoidaGreater NoidaGhaziabadSonipatPanipatRohtakRewariPalwalBhiwadiMeerutNeemranaTapukaraBawalManesarDharuheraMuzaffarnagarJaipurChandigarh
Fast Techno-Commercial Offer

Request an MCC / IMCC Proposal

Submit your motor load list, feeder ratings, or Single-Line Diagram (SLD). Our senior engineering desk will verify Type-2 coordination, drawer sizes, and provide a comprehensive proposal.

Reviewed by Adhunik Powertech engineering team.

Frequently Asked Technical Questions

Have a Motor Feeder Schedule or Plant SLD?

Our engineering team in Gurugram / Delhi NCR reviews electrical schedules and delivers complete GA drawings and offers.